 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TS3704 Micropower quad CMOS voltage comparators Features Push-pull CMOS output (no external pull-up resistor required) Extremely low supply current: 9a typ per comparator Wide single supply range 2.7V to 16V or dual supplies (1.35V to 8V) Extremely low input bias current: 1pA typ Extremely low input offset current: 1pA typ Input common-mode voltage range includes GND High input impedance: 1012 typ Last response time: 2s typ. for 5mV overdrive Pin-to-pin and functionally compatible with bipolar LM339 N DIP14 (Plastic package) D SO14 (Plastic micropackage) P TSSOP14 (Thin shrink small outline package) Pin connections (Top view) Description The TS3704 is a micropower CMOS quad voltage comparator with extremely low consumption of 9A typ / comparator (20 times less than bipolar LM339). The push-pull CMOS output stage allows power and space saving by eliminating the external pull-up resistor required by usual opencollector output comparators. Thus response times remain similar to the LM339. Output 2 1 14 13 12 + + + + 11 10 9 8 Output 3 Output 4 V CC Non-inverting Input 4 Inverting Input 4 Non-inverting Input 3 Inverting Input 3 Output 1 2 VCC + 3 Inverting Input 1 4 Non-inverting Input 1 5 Inverting Input 2 6 Non-inverting Input 2 7 February 2007 Rev 3 1/11 www.st.com 11 Schematic diagram TS3704 1 Schematic diagram Figure 1. Schematic diagram (for 1/4 TS3704) VCC + T 10 T1 T2 T9 T17 R1 Input T3 T4 T11 T12 Input + T18 T21 Output T 13 T8 T19 T20 T5 T6 T7 T14 T15 T16 VCC - 2/11 TS3704 Absolute maximum ratings 2 Absolute maximum ratings Table 1. Symbol VCC+ Vid Vi Vo Io IF Supply voltage (1) Differential input voltage Input voltage (3) (2) Absolute maximum ratings Parameter Value 18 18 18 18 20 (4) Unit V V V V mA mA Output voltage Output current Forward current in ESD protection diodes on input Power dissipation DIP14 SO14 TSSOP14 (5) 50 1500 830 710 -65 to +150 500 50 pd mW Tstg Storage temperature range HBM: human body model(6) C V V kV ESD MM: machine model (7) (8) CDM: charged device model 1.5 1. All voltage values, except differential voltage, are with respect to network ground terminal. 2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. 3. The magnitude of the input and the output voltages must never exceed the magnitude of the positive and negative supply voltages. 4. Guaranteed by design. 5. Pd is calculated with Tamb = +25C, Tj = +150C and Rthja = 80C/W for DIP14 package Rthja = 150C/W for SO14 package Rthja = 175C/W for TSSOP14 package 6. Human body model: A 100pF capacitor is charged to the specified voltage, then discharged through a 1.5k resistor between two pins of the device. This is done for all couples of connected pin combinations while the other pins are floating. 7. Machine model: A 200pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5). This is done for all couples of connected pin combinations while the other pins are floating. 8. Charged device model: all pins and the package are charged together to the specified voltage and then discharged directly to the ground through only one pin. This is done for all pins. Table 2. Symbol VCC+ Vicm Operating conditions Parameter Supply voltage TS3704C, TS3704I TS3704M Common mode input voltage range Operating free-air temperature range TS3704C TS3704I TS3704M Value Unit 2.7 to 16 4 to 16 0 to VCC+ -1.5 0 to +70 -40 to +125 -55 to +125 V V Toper C 3/11 Electrical characteristics TS3704 3 Electrical characteristics Table 3. Symbol VCC+ = 3V, VCC- = 0V, Tamb = 25C (unless otherwise specified) Parameter Input offset voltage (1) Vic = 1.5V Tmin Tamb Tmax Input offset current (2) Vic = 1.5V Tmin Tamb Tmax Input bias current (2) Vic = 1.5V Tmin Tamb Tmax Input common mode voltage range Tmin Tamb Tmax Common-mode rejection ratio Vic = Vicm min Supply voltage rejection ratio VCC+ = 3V to 5V High level output voltage Vid = 1V, IOH = -4mA Tmin Tamb Tmax Low level output voltage Vid = -1V, IOL = 4mA Tmin Tamb Tmax Supply current (each comparator) No load - Outputs low Tmin Tamb Tmax Response time low to high Vic = 0V, f = 10kHz, CL = 50pF, overdrive = 5mV TTL input Response time high to low Vic = 0V, f = 10kHz, CL = 50pF, overdrive = 5mV TTL input 2 1.8 0 0 80 75 2.4 1 300 1 600 VCC+-1.2 VCC+ -1.5 V pA Min. Typ. Max. Unit Vio 5 6.5 mV Iio pA Iib Vicm CMR SVR dB dB V VOH VOL 300 400 575 20 25 mV ICC 7 A tPLH 1.2 0.7 2 0.15 s tPHL s 1. The specified offset voltage is the maximum value required to drive the output up to 2.5V or down to 0.3V. 2. Maximum values include unavoidable inaccuracies of the industrial tests. 4/11 TS3704 Table 4. Symbol Electrical characteristics VCC+ = 5V, VCC- = 0V, Tamb = 25C (unless otherwise specified) Parameter Input offset voltage (1) Vic = 2.5V, Vcc+ = 5V to 10V Tmin Tamb Tmax Input offset current (2) Vic = 2.5V Tmin Tamb Tmax Input bias current (2) Vic = 2.5V Tmin Tamb Tmax Input common mode voltage range Tmin Tamb Tmax Common-mode rejection ratio Vic = Vicm min Supply voltage rejection ratio VCC+ = +5V to +10V High level output voltage Vid = 1V, IOH = -4mA Tmin Tamb Tmax Low level output voltage Vid = -1V, IOL = 4mA Tmin Tamb Tmax Supply current (each comparator) No load - Outputs low Response time low to high Vic = 0V, f = 10kHz, CL = 50pF, overdrive = 5mV Overdrive = 10mV Overdrive = 20mV Overdrive = 40mV TTL input Response time high to low Vic = 0V, f = 10kHz, CL = 50pF, overdrive = 5mV Overdrive = 10mV Overdrive = 20mV Overdrive = 40mV TTL input Fall time f = 10kHz, CL = 50pF, overdrive 50mV 4.5 4.3 0 0 Min. Typ. Max. Unit Vio 1.2 5 6.5 mV Iio 1 300 1 600 VCC+-1.2 VCC+ -1.5 80 92 4.7 pA Iib pA Vicm CMR SVR V dB dB V VOH VOL 200 9 300 375 20 25 mV ICC A tPLH 1.2 1 0.9 0.8 0.7 2 1.5 0.9 0.7 0.15 30 s tPHL s tf ns 1. The specified offset voltage is the maximum value required to drive the output up to 4.5V or down to 0.3V. 2. Maximum values include unavoidable inaccuracies of the industrial tests. 5/11 Package information TS3704 4 Package information In order to meet environmental requirements, STMicroelectronics offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an STMicroelectronics trademark. ECOPACK specifications are available at: www.st.com. 6/11 TS3704 Package information 4.1 DIP14 package mechanical data Dimensions Ref. Min. a1 B b b1 D E e e3 F I L Z 1.27 3.3 2.54 0.050 8.5 2.54 15.24 7.1 5.1 0.130 0.100 0.51 1.39 0.5 0.25 20 0.335 0.100 0.600 0.280 0.201 1.65 Millimeters Typ. Max. Min. 0.020 0.055 0.020 0.010 0.787 0.065 Inches Typ. Max. 7/11 Package information TS3704 4.2 SO14 package mechanical data Dimensions Ref. Min. A a1 a2 b b1 C c1 D E e e3 F G L M S 3.8 4.6 0.5 8.55 5.8 1.27 7.62 4.0 5.3 1.27 0.68 8 (max.) 0.149 0.181 0.019 8.75 6.2 0.35 0.19 0.5 45 (typ.) 0.336 0.228 0.050 0.300 0.157 0.208 0.050 0.026 0.344 0.244 0.1 Millimeters Typ. Max. 1.75 0.2 1.65 0.46 0.25 0.013 0.007 0.019 0.003 Min. Inches Typ. Max. 0.068 0.007 0.064 0.018 0.010 8/11 TS3704 Package information 4.3 TSSOP14 package mechanical data Figure 2. TSSOP14 package Dimensions Ref. Min. A A1 A2 b c D E E1 e K L 0 0.45 0.60 0.05 0.8 0.19 0.09 4.9 6.2 4.3 5 6.4 4.4 0.65 BSC 8 0.75 0 0.018 0.024 1 Millimeters Typ. Max. 1.2 0.15 1.05 0.30 0.20 5.1 6.6 4.48 0.002 0.031 0.007 0.004 0.193 0.244 0.169 0.197 0.252 0.173 0.0256 BSC 8 0.030 0.004 0.039 Min. Inches Typ. Max. 0.047 0.006 0.041 0.012 0.0089 0.201 0.260 0.176 A A2 A1 b e K c L E D E1 PIN 1 IDENTIFICATION 1 9/11 Ordering information TS3704 5 Ordering information Table 5. Order codes Temperature range Package DIP14 0C, +70C TS3704CD/CDT TS3704IN TS3704ID/IDT TS3704IPT TS3704MN TS3704MD/MDT TS3704MPT -55C, +125C -40C, +125C SO14 DIP14 SO14 TSSOP14 DIP14 SO14 TSSOP14 Packaging Tube Tube or tape & reel Tube Tube or tape & reel Tape & reel Tube Tube or tape & reel Tape & reel Marking TS3704CN 3704C TS3704IN 3704I 3704I TS3704MN 3704M 3704M Part number TS3704CN 6 Revision history Date 1-Oct- 2004 1-Aug-2005 Revision 1 2 Initial release. 1 - PPAP references inserted in the datasheet. 2 - ESD protection inserted in Table 1 on page 3. PPAP references removed. Updated footnotes related to ESD in Table 1 on page 3. Added Table 2 on page 3. Order codes added to Table 5 on page 10. Changes 26-Feb-2007 3 10/11 TS3704 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 11/11 |
Price & Availability of TS3704ID
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |